Sync Strike RGB SCART Sync Cleaner

Customer group: Guest
Register
Login
Home

Selection guide
Menu
Contact
Legal Notice
Checkout
Shopping cart(0)Article
You do not have any products in your shopping cart yet.
Wishlist(0)Article
Your wishlist is empty.

ARCADEFORGE / Sync Strike

Prepare sync from an RGB SCART source for a suitable scaler or monitor, using an LM1881 and separate audio outputs.

RGB SCART input · LM1881 sync processing · 15 kHz output

Products description

ARCADEFORGE / SYNC STRIKE

Clean up sync in your RGB signal chain.

Sync Strike uses an LM1881 to extract sync information from the composite video signal of a suitable RGB SCART source. RGB, cleaned C-Sync and separate V-Sync are available for further processing. The line frequency remains unchanged.

01 / SYNC

Process the sync signal

The integrated LM1881 separates sync information from video, providing C-Sync and V-Sync.

02 / CONNECTIONS

SCART input, accessible outputs

An RGB SCART input, HD15 output and screw terminals provide signal access for suitable scalers and custom projects.

03 / AUDIO

Separate audio outputs

Left and right audio are available at the RCA outputs, independently of the video processing path.

Specifications at a glance

Input: RGB SCART socket
Sync processing: LM1881; C-Sync and separate V-Sync
Video output: HD15 D-sub with 15 kHz signals; not standard 31 kHz VGA
Additional connections: Screw terminals for RGB, sync, audio and power
Audio: Left/right RCA outputs
Power: External regulated 5 V or suitable power via SCART pin 8, selected by switch

Plan your setup

What you need

A suitable RGB SCART source with compatible sync/video.
A scaler or monitor supporting the output’s 15 kHz RGB/sync signals and levels.
A suitable power source. External operation specifies regulated 5 V with at least 0.5 A; SCART-powered operation depends on the source.

Connection & setup

Compare the input/output signals with the requirements of the downstream device.
With equipment powered off, connect RGB SCART and suitable output wiring. Connect the RCA audio outputs if needed.
Select the power source with the switch. Use SCART pin 8 only if the source provides the required supply.

Complete your signal chain

Explore UMSA for 15 kHz RGBHV to RGB SCART

Package contents & setup requirements

Included

Sync Strike in the selected product configuration

Also needed

RGB SCART source and matching signal cables
Suitable scaler or monitor; audio cables for separate sound output
Regulated 5 V, at least 0.5 A for external power, or a suitable supply through SCART pin 8

Fits your setup when …

The receiving device accepts 15 kHz RGB and the output sync signals/levels
The HD15 connector does not turn the signal into standard 31 kHz VGA

Enclosure and PSU inclusion depend on your selected product options. Plan signal cables separately.

Before you buy

Is Sync Strike a scaler?

No. It processes sync and provides signal connections. It does not convert 15 kHz to 31 kHz VGA.

Can I connect any VGA monitor?

No. HD15 describes the connector shape. The connected monitor or scaler must support the actual 15 kHz output signals.

Do I need an external power supply?

If the source does not provide suitable power through SCART pin 8, an external regulated 5 V supply is required. Select the source with the switch.