ARCADEFORGE / JAMMA Adapter for GBS-8200 / GBS-8220
Connect a suitable GBS-8200/GBS-8220 scaler to your JAMMA setup and use its VGA output with a compatible monitor.
JAMMA → GBS scaler · VGA signal chain · Scaler separate
Products description
ARCADEFORGE / JAMMA ADAPTER FOR GBS-8200 / GBS-8220
Connect JAMMA to your GBS scaler.
This adapter provides a JAMMA connection for a suitable GBS-8200 or GBS-8220 scaler. The additional scaler board performs the video conversion. The adapter alone does not generate a VGA picture.
Connect the scaler
Route the required signals from your JAMMA setup to a compatible GBS scaler.
The GBS handles conversion
The downstream scaler creates the VGA output. Resolution and monitor compatibility depend on its configuration.
Add SLG3000 downstream
SLG3000 can add a scanline effect after a suitable VGA output.
Specifications at a glance
- Adapter
- JAMMA connection for GBS-8200 / GBS-8220
- Video conversion
- Performed by the additional scaler board
- Monitor connection
- The scaler’s VGA output
- Power
- Use the intended JAMMA supply arrangement; check the wiring
Preparation & connection
What you need
- A GBS-8200 or GBS-8220 scaler matching the adapter.
- A suitable JAMMA setup with correct power and pinout.
- A VGA monitor compatible with the scaler output, plus the required cables.
Getting started
- With power off, connect the adapter to the game board or JAMMA wiring.
- Connect the adapter to the matching GBS scaler and the scaler’s VGA output to the monitor.
- Check power and wiring, then configure the scaler for a signal supported by the monitor.
More hardware for your project
Explore SLG3000 for the VGA outputPackage contents & setup requirements
Included
- JAMMA scaler adapter in the selected configuration
Also needed
- Matching GBS-8200 or GBS-8220 scaler
- Suitable JAMMA game board with correct power and pinout
- VGA monitor compatible with the scaler output and connection cables
Fits your setup when …
- The adapter and scaler match
- Video conversion takes place in the GBS scaler; match its output resolution to the monitor
Before you buy
Is the scaler board always included?
A scaler is required additionally. Check the product configuration selected above.
Does the adapter alone produce VGA?
No. The GBS scaler converts the video signal.
Can I add scanlines?
Yes, with a suitable SLG3000 after the scaler’s VGA output. Signal and resolution must suit the monitor and scanline generator.
Customers who bought this product also bought the following products:
Supergun MAK Strike Power Cable for for Arcade PSUs
Scanline Generator SLG3000SLG3000
Sync Strike Enclosure in transparent laser cut acryl.
Pi2Jamma with native 15 khz video output
This Product was added to our catalogue on 31/07/2012.
Sync Strike »
More information on your personal page »