ARCADEFORGE / JAMMA to CPS2 Kick-Harness Adapter
Connect the extra buttons from your extended JAMMA controls to a CPS2 kick-harness interface.
CPS2 kick harness · Buttons 4–6 · 2 players
Products description
ARCADEFORGE / JAMMA TO CPS2 KICK-HARNESS ADAPTER
Six-button controls for your CPS2 setup.
CPS2 systems route buttons 4, 5 and 6 for both players through an additional kick-harness connector. This adapter links them to suitably extended JAMMA controls, such as MAK Strike with matching controller wiring.
Connect the extra buttons
Access kick-harness buttons 4, 5 and 6 for players 1 and 2.
Extended wiring required
A standard three-button JAMMA connection does not automatically provide the additional inputs.
Check the complete chain
Controllers, supergun or cabinet, and adapter must use matching extra-button assignments.
Specifications at a glance
- Function
- Connection for CPS2 kick-harness buttons
- Players
- Player 1 and player 2
- Extra buttons
- Buttons 4, 5 and 6 per player
- Requirement
- Matching extended JAMMA and controller pinouts
Preparation & connection
What you need
- A CPS2 system with a matching kick-harness connector.
- Controls with suitably extended JAMMA inputs for six buttons per player.
- Appropriate wiring and controllers with matching assignments.
Getting started
- Switch power off and compare CPS2, adapter and control pinouts.
- Connect the adapter to the intended extended JAMMA and kick-harness wiring.
- After powering on, test all six buttons for both players.
More hardware for your project
Explore Supergun MAK StrikePackage contents & setup requirements
Included
- One JAMMA to CPS2 kick-harness adapter
Also needed
- CPS2 system with a matching kick-harness connector
- Extended JAMMA controls, matching wiring and controllers
Fits your setup when …
- Buttons 4, 5 and 6 for both players are correctly wired throughout the connection
- Standard JAMMA wiring alone does not automatically provide these extra buttons
Before you buy
Does it work in every JAMMA cabinet?
Only if the extra buttons are wired appropriately. Standard JAMMA alone does not provide all six buttons.
Does it replace a controller encoder?
It connects the extra buttons. Your control system must already provide the required signals.
Can I use MAK Strike?
MAK Strike provides an extended six-button pinout. Still compare the actual wiring and controller assignments.
Customers who bought this product also bought the following products:
Scanline Generator SLG3000SLG3000
Arcade Power Supply Unit
Pi2Jamma with native 15 khz RGB CRT output
This Product was added to our catalogue on 01/04/2021.
Supergun MAK Strike »
More information on your personal page »