ARCADEFORGE / Supergun MAK Strike
Play original JAMMA arcade boards on a suitable RGB SCART television, with NeoGeo-compatible controller ports and accessible controls.
JAMMA supergun · RGB SCART · 2 controller ports
Products description
ARCADEFORGE / SUPERGUN MAK STRIKE
Your arcade board, beyond the cabinet.
Supergun MAK Strike connects a compatible JAMMA game board to a suitable RGB SCART TV and compatible controllers. It brings video, audio, controls and power connections together in one interface. A suitable arcade power supply is required separately.
RGB and sound to your TV
SCART carries RGB video and audio; RCA outputs provide separate audio. Select mono/stereo and adjust the RGB levels for your setup.
Controller ports and service buttons
NeoGeo-compatible controller ports plus start, coin, test and service controls help you operate your game board.
5 V display and accessible connections
The voltage display shows the 5 V supply. Side-accessible controls and screw terminals support installation in custom projects.
Specifications at a glance
- Game board
- JAMMA connection with extended 6-button pinout
- Video
- RGB SCART with RGB level adjustment
- Audio
- SCART and RCA; switchable mono/stereo
- Controllers
- 2 NeoGeo-compatible D-sub 15 ports; see pinout below
- CHAMMA
- DIP switch for the alternative button 6 assignment
- Power
- Suitable arcade PSU through the designated Molex connector; 5 V display
Plan your setup
What you need
- A compatible JAMMA game board with matching supply voltages and wiring.
- An RGB-capable SCART TV, suitable RGB SCART cable and compatible controllers.
- A correctly wired arcade PSU. Check power and pinouts before connecting your game board. MAK Strike is not an HDMI converter or scaler.
Connection & setup
- With power off, check the wiring of the suitable PSU. Power the supergun without a game board first and check the 5 V display.
- Switch power off again. Connect the JAMMA board, TV and controllers only after verifying the supply.
- Match the JAMMA/CHAMMA setting and mono/stereo mode to the game board. Then power on and adjust video/audio settings.
Connector pinouts
The tables show the original extended JAMMA and controller-port assignments for MAK Strike. Enabling CHAMMA changes the button 6 assignment; compare it with your game board before connecting.
JAMMA
| Parts Side | Solder Side | ||
| GND | 1 | A | GND |
| GND | 2 | B | GND |
| +5V | 3 | C | +5V |
| +5V | 4 | D | +5V |
| -5V | 5 | E | -5V |
| +12V | 6 | F | +12V |
| NC | 7 | H | NC |
| Coin Counter 1 | 8 | J | Coin Counter 2 |
| Lock Out 1 | 9 | K | Lock Out 2 |
| Speaker +, Audio L | 10 | L | Speaker - |
| Player 1 Button 6 | 11 | M | Player 2 Button 6 |
| Video Red | 12 | N | Video Green |
| Video Blue | 13 | P | Video Sync |
| Video GND | 14 | R | Service Switch |
| Test Switch | 15 | S | Slam Switch |
| Coin Switch 1 | 16 | T | Coin Switch 2 |
| Player 1 Start | 17 | U | Player 2 Start |
| Player 1 Up | 18 | V | Player 2 Up |
| Player 1 Down | 19 | W | Player 2 Down |
| Player 1 Left | 20 | X | Player 2 Left 2 |
| Player 1 Right | 21 | Y | Player 2 Right |
| Player 1 Button 1 | 22 | Z | Player 2 Button 1 |
| Player 1 Button 2 | 23 | a | Player 2 Button 2 |
| Player 1 Button 3 | 24 | b | Player 2 Button 3 |
| Player 1 Button 4 | 25 | c | Player 2 Button 4 |
| Player 1 Button 5 | 26 | d | Player 2 Button 5 |
| GND | 27 | e | GND |
| GND | 28 | f | GND |
Controller / D-Sub 15
| DSUB 15 pin | Neo Geo | MAK STRIKE |
| 1 | Ground | Ground |
| 2 | NC | Button 5 |
| 3 | Select | Coin |
| 4 | D | Button 4 |
| 5 | B | Button 2 |
| 6 | Right | Right |
| 7 | Down | Down |
| 8 | 5V | 5V |
| 9 | D | NC |
| 10 | NC | Button 6 |
| 11 | Start | Start |
| 12 | C | Button 3 |
| 13 | A | Button 1 |
| 14 | Left | Left |
| 15 | Up | Up |
Complete your signal chain
Explore Sync Strike for a downstream RGB signal chainPackage contents & setup requirements
Included
- MAK Strike in the selected configuration
Also needed
- Compatible JAMMA game board and matching arcade PSU
- RGB SCART television, RGB SCART cable and suitable controllers
- Matching power wiring and extra button wiring where needed
Fits your setup when …
- Controller wiring and JAMMA/CHAMMA pinouts match the whole signal chain
- Check supply voltages and connector pinout before connecting the game board
Before you buy
Can I use NeoGeo controllers directly?
The ports are NeoGeo-compatible. Extra buttons 5 and 6 use the extended MAK Strike assignments. Check the table below when using adapters or custom controllers.
Are JAMMA and CHAMMA identical?
No. Additional button assignments may differ. The CHAMMA DIP setting must match the actual game board and wiring.
Can I connect an HDMI TV directly?
MAK Strike outputs RGB SCART. HDMI requires a suitable additional converter or scaler.
Customers who bought this product also bought the following products:
Jamma Arcade extension cable with enclosure
Jamma Adapter 1942
Scanline Generator SLG3000SLG3000
Supergun MAK Strike Power Cable for for Arcade PSUs
This Product was added to our catalogue on 01/04/2021.
SLG3000 »
More information on your personal page »